230
Puncture Repair & Wheel Changing
Removing the wheel trim (steel wheels only)
Slide the flat, wedge, end of the wheel wrench behind the edge of
the wheel trim (see illustration). Then, working carefully around
the wheel, apply a twisting action to the tool to prise the trim from
the wheel.
NOTE: When refitting the wheel trim, ensure that the valve stem is
located between the valve stem guides (plastic lugs arrowed in illustration).
Removing the wheel bolt cover (alloy wheels)
*
Insert the hooked end of the removal tool into the small
rectangular aperture in the wheel bolt cover (arrowed in
illustration). Pull the cover from the wheel to gain access to the
wheel bolts.
H2785
HB0586
To Next Page
Loading...
