252
Bulb Replacement
BOOT LIGHT (Saloon)
Replacement bulb: 10 watt
Insert a small flat-bladed screwdriver into the indent on one of the
narrow sides of the lens (see arrow in illustration) and carefully
prise the unit from its location. Push and twist the bulb to remove.
LOADSPACE LIGHT (Tourer)
Replacement bulb: 5 watt
Insert a small flat-bladed screwdriver into the indent on the rear
edge of the lens (see inset) and carefully prise the lens from the light
unit. Gently spread the flexible contacts to release the bulb.
When replacing, locate one side of the lens, then push firmly on
the other side, until the lens ‘clicks’ into position.
H2783
HB0038
To Next Page
Loading...
