62
Load Carrying - Tourer
Load Carrying - Tourer
FOLDING THE REAR SEATS
The rear seat backrest is divided into two parts, either, or both, of
which can be folded forward onto the seat cushion to increase the
loadspace area.
To release the backrest, press one or both of the release catches (as
required) shown in the illustration.
‘Latch secure’ indicators
Ensure that the rear seat backrests are securely latched in the
upright position when the seat is in use and when loads are
carried in the loadspace behind.
After returning either (or both) parts of the backrest to the upright
position, check to ensure that the RED band on each release catch
(arrowed in inset) is no longer visible - this will confirm that the
latches retaining the backrest have engaged and that the backrest is
secure.
When returning the backrest to the upright position, ensure that
the seat belts are not trapped.
NOTE: The centre seat belt is prevented from operating if the backrest
latch is not fully engaged.
HB0023a
To Next Page
Loading...
