Why my Royal Sovereign RSH-1151 Laminator won't turn on?
If your Royal Sovereign Laminator will not turn on, check the following: 1. Ensure the power plug is properly plugged into the outlet. 2. Verify the power switch is in the “I” (On) position. 3. Check if the circuit breaker has tripped and reset it if necessary. 4. See if the main power fuse has blown and replace it if needed.
How to fix Royal Sovereign RSH-1151 Laminator with no main power?
If your Royal Sovereign Laminator has no main power, start by ensuring that the outlet you're using has electricity. If the outlet is functional, check the following: * Blown main fuse: Replace the main fuse located above the main power switch. * Disconnected main power wires: Check that the main power wires are properly connected. * Defective transformer: Replace the transformer if necessary.
General| Model | RSH-1151 |
|---|---|
| Roller Type | Silicone |
| Maximum Laminating Thickness | 5 mil |
| Number of Rollers | 2 |
| Warm-Up Time | 5 minutes |
| Power Consumption | 300W |
To Next Page
