RS PRO ILOM-508A - Instrument description; Notice in prior to the testing

Milliohm Meter/ English
2016-9-10 / V001 EN-3
Instrument description:
1. RX socket:
For testing clips input.
2. LCD display:
Indication of measured value and unit.
3. ZERO ADJ. Knob:
For zero adjustment.
4. Power switch and Range
selector switch:
Selection in functional range of the meter.
5. D-H:
Lock up the LCD reading.
6. DC Power socket:
For AC adapter (optional accessory)
FIG (1)
Notice in prior to the testing:
Don not connect the testing input terminals LO, RX, RX, HI) to any input voltage
directly, this is to prevent any possible damage to the internal circuits of the meter.