RS SAILING 21 - 4.6.3 - Dressing the Mast - Forestay

16
4.6.2 - Dressing the Mast - Spreaders
c)
Remove the screw and the front face of the spreader tip.
Thread the shroud wire into the gap and replace the front face of the spreader tip
and the screw.
4.6.3 - Dressing the Mast - Forestay
a)
Attach the forestay to the mast with the T-terminal.
The bottle screw has been set to the base setting for the standard amount of
mast rake. Do not adjust it at this stage.
Repeat for the other shroud and spreader.