3.8 - Rigging the Boom
To rig the boom, you will need:
• The boom
• The kicking cascade
• The kicker boom strop
The standard outhaul will come rigged on the boom, if you have the Race pack,
refer to the instructions included within to rig the race outhaul.
a)
b)
• Take the kicker boom strop and tie knot #3 in one end.
• Thread the other end through the small metal eyelet on the top of the boom,
about 50 cm from the front end.
• Thread the end through the metal loop on the top block of the kicking cascade.
To Next Page
Loading...
