3.14 - Completion
a)
b)
Now you are almost ready to go Feva sailing. All that is left to do is:
• Fit the rudder to the back of the boat
• Tidy the halyards away
• Check that all knots and shackles are tied securely
push down until the retaining clip ‘clicks’ into place.
side to side whilst pushing down.
• To remove the rudder, simply push the retaining clip in and pull the stock up.
• Coil the main and jib halyards neatly and stow them in the halyard bag.
TIME TO GO SAILING!
To Next Page
Loading...
