3.11 - Hoisting the Mainsail
To complete this section, you will need:
• The mainsail mainsail, or the Feva XL 3-batten
mainsail)
• The kick
• The mainsheet
a)
b)
c)
• Take the mainsheet and thread one end through the large block in the centre of the boat.
• Next, thread the mainsheet through the block in the middle of the boom, leading it
towards the back of the boat.
• Thread the mainsheet through the webbing strap (with the
outhaul), and through the block at the back end of the boom.
To Next Page
Loading...
