Length Overall (LOA) 3.64m 12’0”
Beam 1.42m 4’8”
Hull Weight 68kg 136lb
Mainsail 5.5m
2
57sq ft
3 Batten Mainsail 6.5m
2
68sq ft
Jib 2.1m
2
22sq ft
Gennaker 7.0m
2
73sq ft
2. Technical Data
3. Commissioning
3.1 Preparation
Your RS Feva comes complete with all the components necessary to take the boat
sailing. In order to commission it, you will need the following tools:
• Pliers, or a shackle key
• PVC Electrician’s Tape
You may require other tools later, should you wish to make any setting or tuning
adjustments to the boat or the rig.
DO NOT use a knife or other sharp object to cut through packaging
containing parts – you may damage the contents!
Whilst your RS Feva has been carefully prepared, it is important that new owners
should check that shackles and knots are tight. This is especially important when
important to check such items regularly prior to sailing.
To Next Page
Loading...
