CONTENTS
1. INTRODUCTION
2. EC CONFORMITY AND IDENTIFICATION
3. SAFETY INFORMATION
3.1 Design Category
3.2 Loading
3.3 Safety Equipment
3.4 Capsize Recovery
3.5 Air Tank
3.6 Man Overboard Prevention and Recovery
3.7 Use of an Outboard Engine
3.8 Towing, Anchoring, Mooring, and Trailing
4. COMMISSIONING
4.1 Preparation
4.2 Unpacking
4.3 Rigging the Mast
4.4 Stepping the Mast
4.5 Rigging the Boom
4.6 The Daggerboard
4.7 The Rudder
4.8 Hoisting the Mainsail
4.9 Rigging the Jib
4.10 Rigging the Gennaker
4.11 Completion
5. SAILING HINTS
5.1 Introduction
5.2 Launching
5.3 Leaving the Beach
5.4 Sailing Close-Hauled and Tacking
5.5 Sailing Downwind and Gybing
To Next Page
Loading...
