22) Now connect the cleat on the kicking cascade to the hook on the mast (see
picture 4.23).
Picture 4.23 The Kicking Cascade
4.9 Rigging the Jib
To complete this section, you will need:
• 1 x Feva jib
• 2 x Feva shrouds
• 1 x shroud shackle
• 1 x jib halyard block
• 1 x jib rope pack – containing:
o 1 x jib halyard
If you are not fitting the jib or the gennaker, move straight on to
Section 4.11 – Completion.
To Next Page
Loading...
