4.11 Completion
Now you are almost ready to go Feva sailing. All that is left to do is:
• Fit the rudder to the back of the boat
• Tidy the halyards away
• Check that all knots and shackles are tied securely
1) To fit the rudder, simply line up the pins with the fitting on the back of the
boat and push down until the retaining clip ‘clicks’ into place. The rudder
may be difficult to get on at first – all it will need is a simple wiggle from side
to side whilst pushing down.
2) To remove the rudder, simply push the retaining clip in and pull the stock up.
3) Coil the main and jib halyards neatly and stow them in the halyard bag (see
picture 4.20).
TIME TO GO SAILING!
To Next Page
Loading...
