Picture 4.4 RS Feva Gennaker Pack
4.3 Rigging the Mast
To complete this section, you will need:
• The mast top section
• The mast lower section
• The main halyard
1) Place the mast top section and mast lower section on the ground, in line with each
other.
2) Slide the inner sleeve of the mast top section into the end of the mast lower
If you have the Jib and/or Genneker Pack, please refer to Section 4.9 Rigging the
Jib, and Section 4.10 Rigging the Gennaker before stepping the mast in the boat.
Genneker Sheet
Genneker Halyard Block
Gennaker
To Next Page
Loading...
