section (see picture 4.5).
3) Push the two mast sections together (see picture 4.6). The angle of the join
should ensure that the mast track on the two sections aligns.
Picture 4.5 Joining the Mast
Picture 4.6 A Joined Mast
4) Uncoil the main halyard
5) Thread one end through the bullseye at the top of the mast (see picture 4.7).
6) Run both ends of the main halyard to the bottom of the mast and tie in
place (this prevents them from disappearing back up the mast!).
To Next Page
Loading...
