RS Feva - 2 Ec Conformity and Identification

2. EC CONFORMITY AND IDENTIFICATION
The RS Feva complies with the EU Directive for Recreational Craft (RCD) which sets
safety requirements for recreational boats sold in Europe. Each RS Feva carries the
CE mark to indicate this compliance. The CE Mark is on the Builder’s Plate in the
cockpit. The Builder’s Plate also includes important safety information which is
described in detail elsewhere in this manual.
Compliance with the EU Directive for Recreational Craft (RCD) is also demonstrated
by the EC Declaration of Conformity in this manual (see page 6).
A RS Feva dinghy can be identified by the Craft Identification Number, which is a
unique serial number on the starboard side of the transom, and is shown on the EC
Declaration of Conformity in this manual.
Each RS Feva is also assigned a unique sail number, which is marked on the bottom
of the CE Declaration form, or can be obtained from RS Racing or your RS dealer.
Normally, it is a requirement that your sail numbers are displayed at sailing regattas.
Sail numbers can be purchased from RS, your RS dealer, or from a sailmaker.