Picture 4.17 The Rudder Fitted in the Stock
Picture 4.18 The Rudder Downhaul
4.8 Hoisting the Mainsail
To complete this section, you will need:
• The mainsail (either the Feva S reefing mainsail, or the Feva XL 3-batten
mainsail)
• The Inglefield clip
• The mainsheet
1) Take the mainsheet and thread one end through the large block in the centre of
the boat.
2) Next, thread the mainsheet through the block in the middle of the boom, leading it
Tiller Extension
Tille
Rudder
Downhaul
Rudder Stock
Rudder Downhaul
Block
To Next Page
Loading...
