OR
• Find the centre of the jib sheet by folding it in half.
• Take the flat stainless-steel shackle from the Jib Pack, and attach the jib
sheet to it.
• Attach the shackle to the jib clew plate.
8) Take one of the jib sheet ends and pass it through the bullseye and jib cleat,
mounted just inboard of the shrouds (see picture 4.28). Do the same with the
other side, and then tie the two ends together.
Picture 4.26 The Jib Halyard Cleat Picture 4.27 The Jib Clew
Picture 4.28 The Jib Bullseye and Cleat
To Next Page
Loading...
