Untie the gennaker downhaul line, taking care not to let go of it, as it will
disappear up the gennaker chute!
5) With the gennaker on the port-hand side of the boat, pass the end of the
gennaker downhaul through the small eyelet in the centre of the gennaker, from
the inside to outside (see picture 4.31).
6) Run the gennaker downhaul line up the outside of the gennaker, and tie it
onto the upper patch (cross of webbing) using a bowline (see picture 4.32).
Picture 4.30 The Tack of the Gennaker
Picture 4.31 Threading the Gennaker Downhaul Line
Knot in Tack Line
To Next Page
Loading...
