AUDIO DISTRIBUTION
27
www.rticontrol.com
Option Description
Group Presets
zone is set to a group level and then adjusted in tandem from a single volume
control interface for easy sitewide control.
• Please note that only 1 group can be active at any given time. Activating a
group that is currently not active will immediately override any current group
and settings that are active.
Create Group
Use this option to populate the section below with a customizable group preset.
Each click of this button will create an additional group preset. A maximum of 8
group presets can be created and stored within the matrix’s memory.
Group 1-8
Each group will have a section in the page that can be minimized and will contain
parameters for modifying the group’s properties. Each group is identied by a
header row that contains the following:
• Source Selection: The drop-down menu to the right of the group ID lists is
used to select the source that is assigned to the group ID.
• Volume Slider: To the right of the source selection drop-down is a volume
slider that is used to set the group volume when the group is active.
• Mute/Un-mute: The mute icon will display the current status of muting for
the group. Press this icon to mute/un-mute the audio for the group when the
group is active.
• Enable/Disable Group: The group active toggle will enable/disable the group.
• Minimize: Use the minimize bar to collapse/open a group to help declutter
the page when multiple groups are present.
Group properties are located below the group header and contains the following
options:
• Group Name: The group name can be modied to help identify or dene a
group. The name entered here will be visible in various locations of the GUI
where groups are referenced.
• Fixed Group: This option is only available for groups 1-4. When this option is
selected the group will no longer be able to be modied externally via the API
or changed when the group is active. When unchecked, and for groups 5-8,
groups are dynamic and can be modied via the API to adjust the group zone
assignments as desired even during operation or if the group is active.
• Delete Group: Use this button to delete the group.
To Next Page
Loading...