RTS DV-3400 - Battery Capacity and Scan List Management

To Next Page

To Previous Page

Note:

Under the talk around state, the transceiver can not

communicate with other transceivers via repeaters.

ADVANCE OPERATIONS

Battery Capacity Enquiry

Pressing the programmed "Battery Capacity Enquiry", the

transceiver will announce current battery capacity. There are 10

grades in total. Grade 10th means full battery capacity.

When the battery state is grade 1th(6.1V), the LED lights red. The

transceiver will voice prompt users to charge timely and also enter

automatically the state of no transmission.

Temporary Deletion of the Interfering Channel

This function can temporarily delete the interfering channel or

occupied channel from scan list. When scan rests on one channel,

pressing the programmed key of Temporary Deletion of the

Interfering Channel, transceiver emits "Du" beep and temporarily

deletes this channel from scan list. But the priority channels cannot

be temporarily deleted. If only one or two channels are in scan list,

this operation is not available. Restart the transceiver to add the

temporarily deleted channels into scan list again.