54
Managing the Multimedia Wi-Fi Wall Switch
Changing the Administrative Login Settings
3. Under Service Provider Login, change the default administrator login settings.
• (Optional) In Username, type a new user name that you will use to log in to
the Web interface. The default user name is super.
•In Password, type a new password to replace the default password sp-admin.
•In Password Confirmation, retype the new password.
4. Click Update Settings. The message Your parameters were saved appears.
You have completed changing the default login settings. The next time you log in to
the Web interface, make sure you use these updated login settings.
Figure 30. The Configuration > Device page
To Next Page
Loading...
