Ruckus Wireless ZoneFlex P300 - Configuring Internet Settings

Configuring Internet Settings
VLAN Overview
ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B 40
Configuring Internet Settings
Internet settings define how the ZoneFlex P300 connects to your local area network
and to the Internet. This section describes how to view and configure the ZoneFlex
P300’s Internet settings. Topics discussed include:
• VLAN Overview
• Configuring an NTP Server
• Configuring the Management VLAN
• Obtaining and Assigning an IP Address
• Configuring the MTU Size
VLAN Overview
The ZoneFlex P300 is like a network switch, in that it supports Wi-Fi connections.
As such, like many advanced switches, ZoneFlex P300s conform to the IEEE
802.1Q standard -- the standard that defines virtual LANs. In an 802.1Q switch, the
concept of VLANs is always present. If a packet arrives without an 802.1Q header,
it is assigned to the native VLAN or untag VLAN.
The single ZoneFlex P300 wireless interface is assigned to assigned a single VLAN,
and is configured to pass all VLAN traffic as a Trunk Port.
The ZoneFlex P300 Ethernet port is also configured to pass all VLAN traffic as a
Trunk Port.