Moving Traffic to Another Channel
Saving a Copy of a Support File to Your Computer
ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B 79
Moving Traffic to Another Channel
1 Navigate to Configuration > Wireless, and choose a less-crowded channel
from the Channel pull-down menu.
NOTE The SmartSelect feature (Auto selection) always attempts to use the best
channel available. If you manually select a channel, then SmartSelect will be unable
to automatically switch channels to adjust to changes in the environment.
2 Click Update Settings to have the ZoneFlex P300 save your changes.
3 Run the SpeedFlex utility to test link performance as described in Verifying the
Connection.
To Next Page
Loading...
