Rebooting the ZoneFlex P300
Saving a Copy of a Support File to Your Computer
ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B 73
Rebooting the ZoneFlex P300
You can use the Web interface to prompt the ZoneFlex P300 to reboot, which
restarts the ZoneFlex P300 without changing any of the current settings. Please
note that rebooting the ZoneFlex P300 disrupts network communications in any
currently active WLANs.
1 Go to Maintenance > Reboot/Reset. The Maintenance > Reboot/Reset page
appears.
2 To reboot the ZoneFlex P300, click Reboot P300 with current settings/Reboot
Now. After a brief pause, you are logged out of the ZoneFlex P300.
Figure 35. The Maintenance > Reboot/Reset page
After approximately one minute, you should be able to log back into the ZoneFlex
P300, which verifies that the reboot was successful. You can also check the LEDs
on the ZoneFlex P300 to verify the status of the device.
To Next Page
Loading...
