Enabling Other Management Access Options
Upgrading Manually using a Local File
ZoneFlex P300 Wireless Bridge User Guide, 800-70956-001 Rev B 67
4 Click Update Settings to have the ZoneFlex P300 save your changes. A
confirmation message appears at the top of the page.
You have completed configuring the management access options.
NOTE Remember to open any relevant firewall ports between the bridge and the
bridge image upgrade/management server. For example, if FlexMaster server is
used, open TCP ports 80 and 443 for HTTP/HTTPS communications, and TCP port
8082 for bridge wake-up commands. (Refer to Release Notes for details.)
FlexMaster only Only allow FlexMaster management.
FlexMaster Server URL URL of the FlexMaster server.
Digest-Authentication
Username and Digest-
Authentication Password
This information is automatically generated by the bridge
and used for authentication with FlexMaster. Change this
value only
if you want the bridge to connect to another
access control server (ACS).
Periodic FlexMaster Inform
Interval
Interval at which the device should attempt to contact
FlexMaster. (Default = 15 minutes.)
Table 10. TR-069 and SNMP Management Options (Continued)
Option Description
To Next Page
Loading...
