J Line Pump
Horizontal Double Suction Centrifugal Pump – API 610 Process Pump
2 V1.032818
FOREWORD
These units are horizontal split case centrifugal pumps and identified by Ruhrpumpen as J Line pumps.
It is recommended that the services of a Ruhrpumpen installation technician be employed for the
installation and initial starting of the pump. Such service will help to ensure the user that the equipment
is properly installed, and will provide an excellent opportunity for the plant operator to receive useful
tips and guidelines relative to the unit. The tools and/or equipment referenced in this manual are not
supplied by Ruhrpumpen unless specifically ordered. This pump design can be serviced with standard
maintenance tools.
Instructions in this manual are written for trained, experienced technicians who are familiar with the
basic principles and tools involved in the installation, care and service of a pump and who, as part of
their trade education have acquired the ability to interpret and follow the detailed specifications
required for such installation, care, and service. Successful operation of the unit is dependent on careful
study of the manual and a well-planned maintenance program.
A complete reading of this manual by personnel in contact with the pump is essential to safety. Incorrect
installation, operation or maintenance can result in personal injury or death to personnel and damage to
the pump and plant.
IMPORTANT: For any component/accessory that has not been manufactured by Ruhrpumpen and is part
of the pump’s equipment, a complete reading of said component/accessory manufacturer’s manual
must be carried out for further information on proper maintenance procedures and relevant safety
warnings.
Correct and orderly installation/assembly is necessary for trouble-free operation of the unit.
Ruhrpumpen does not assume any liability for damage resulting from inadequate installation/assembly.
The chosen location for installation must offer enough space for maintenance activities. Ruhrpumpen
recommends consulting also API Recommended Practice 686 to ensure proper installation in your
facility.
Before performing any service function be certain that the unit is separate from its power source or that
the power source is locked out to prevent any form of energy from entering the equipment.
Contact with hot surfaces of the pump can cause severe burns. Care must be taken where such surfaces
are exposed. Care must also be taken to prevent ignition of flammable fluids or other material.
Information in this manual is believed to be reliable, but it is not guaranteed by Ruhrpumpen as to its
completeness or accuracy.
© 2018 Ruhrpumpen
All Rights Reserved.
To Next Page
Loading...
