J Line Pump
Horizontal Double Suction Centrifugal Pump – API 610 Process Pump
14 V1.032818
Figure 3.1 Correct position of the pump lifting – bare shaft pump only.
3.4 STORING
If the pump is not installed immediately (within one month after shipping date), it should be safely
stored prior to installation in a dry location free of dirt and grit. Furthermore, the pump unit (pump,
driver, etc.) should not be subject to sudden temperature changes or vibrations.
Observe the following steps:
1. Remove pump from shipping crate, but do not damage the crate because the unit is to be
reboxed.
2. Remove all instruments and mechanical seal; store them safely.
3. Plug the instrument taps.
To Next Page
Loading...
