8 / 72
Horizontal End Suction Pump for Chemical Process, ASME B73.1-2001
Installation, Operation, and Maintenance Manual – CPP21
the contents of the operating manual are fully understood by the personnel.
2.3 HAZARDS IN THE EVENT OF NON-COMPLIANCE WITH THE SAFETY INSTRUCTIONS
Non-compliance with the safety instructions may produce a risk to the personnel as well as to the environment
and the unit and results in loss of any right to claim damages.
Non-compliance may involve the following hazards:
• Risk of injury or death.
• Failure of important functions of the machine/plant
• Exposure of people to electrical, mechanical, chemical, and thermal hazards
• Endangering or damaging the environment due to hazardous substances being released.
2.4 COMPLIANCE WITH REGULATIONS PERTAINING TO SAFETY AT WORK
When operating the pump, the safety instructions contained in this manual, the relevant national accident
prevention regulations, local and federal health and safety regulations, quality system requirements, and any
other service and safety instructions issued by the plant operator must be observed.
2.5 SAFETY INSTRUCTIONS RELEVANT FOR OPERATION
• If hot or cold machine components involve hazards, they must be guarded
against accidental contact (attach warning signs).
• Guards for moving parts (e.g. coupling) must not be removed from the machine
while in operation (mounting must be possible only with tools).
• Any leakage of hazardous fluids must be drained away to prevent any risk to
persons or the environment. Statutory regulations are to be complied with.
• Hazards resulting from electricity must be prevented.
2.6 SAFETY INSTRUCTIONS RELEVANT FOR MAINTENANCE, INSPECTION AND ASSEMBLY WORK
It is the plant operator's responsibility to ensure that all maintenance, inspection and assembly work is
To Next Page
Loading...