Ruida Technology RDLC320 - Chapter 10 Controller to PC with Single NIC; 10.1 Single Controller Connects to PC with Single NIC

RDLC320 Controller User Manual
41 / 45
© 2016 Ruida Technology. All Rights Reserved.
Chapter 10 Controller to PC with Single NIC
10.1 Single Controller Connects to PC with Single NIC
Step 1:
Set the work mode to be ETHERNET on the panel. And then set the
controller IP address between 192.168.001.100-192.168.001.149
Step 2:
Set the IP address in the PC. The IP address is between
192.168.001.2-192.168.001.049. See picture1-1.
Picture1-1 PC IP configuration