Ruijie Reyee RG-ES1 Series

Hardware Installation and Reference Guide Product Overview
3
Note:
1. Electrical port status LED
2. PoE status LED
3. 10/100Base-TX PoE port
4. 10/100Base-TX auto-sensing Ethernet port
5. Nameplate on the bottom of the device
Back Panel
Figure 1-3 Back Panel of the RG-ES106D-P
Note:
1. Port mode switchover button
2. System status LED
3. DC power socket
4. Grounding pole
Heat Dissipation
The RG-ES106D-P adopts natural heat dissipation, thereby ensuring normal operation. You must maintain a minimum
clearance of 100 mm (3.94 in.) around the RG-ES106D-P. It is recommended that you clean the RG-ES106D-P once every
three months to avoid dust from blocking vents.
LEDs
5