Ruijie Reyee RG-ES1 Series

Hardware Installation and Reference Guide Product Overview
14
Blinking orange
The port is receiving or sending traffic at a rate of
100 Mbps.
Solid green
The port is connected at a rate of 1000 Mbps.
Blinking green
The port is receiving or sending traffic at a rate of
1000 Mbps.
RJ45 PoE status LED
PoE (1–16)
Off
PoE does not supply power.
Solid green
PoE is operational.
Blinking green
PoE is overloaded.
1.5 RG-ES116G
Technical Specifications
Model
RG-ES116G
Ports
Sixteen 10/100/1000Base-T auto-sensing Ethernet ports
Power Supply
 AC input
Rated voltage range: 100 V AC to 240 V AC
Maximum voltage range: 90 V AC to 264 V AC
Frequency: 50/60 Hz
Rated current: 0.5 A
EEE
Not supported
PoE
Not supported
Power
Consumption
11 W
Operating
Temperature
0°C to 45°C (32°F to 113°F)
Storage
Temperature
-40°C to +70°C (-40°F to +158°F)
Operating Humidity
10% to 90% RH
Storage Humidity
5% to 95% RH
Port Mode
Switchover in four modes:
1. Flow Control On
2. Flow Control Off
3. Port Isolation
When port isolation is enabled, ports 1-14 are isolated from each other, but can communicate
with ports 15 and 16.