Web-based Configuration Guide Network management
24
(2) Click +Client Subnet, enter the client type (which can be selected or customized in the drop-down box), the
network segment of the client, the planned number and the corresponding server IP address to identify the
client. Multi-type client network segments can be set. Click Identify Client after filling in.
(3) Display the identified client and client server information, including IP address, MAC address, SN number of
the connected switch and connection port. Click to view the detailed information. If the connection information
to the client server is not identified, you need to click Configure and fill in the relevant information manually.
After confirming that the client device information is correct, click Isolate Client.
To Next Page
Loading...
Need help?
General