Web-based Configuration Guide Diagnostics
134
Choose Local Device > Diagnostics > Info Center > Routing Info.
Displays the routing information on the device. The search box in the upper-right corner supports finding route
entries based on IP addresses.
Note
To set up static routes, see 6.3.
9.1.4 DHCP Clients
Caution
If the device does not support L3 functions (such as RG-NBS3100 Series and RG-NBS3200 Series Switches),
this type of information is not displayed.
Choose Local Device > Diagnostics > Info Center > DHCP Clients.
Displays the IP address information assigned to endpoints by the device as a DHCP server.
Note
To configure DHCP server related functions, see 6.2.
9.1.5 ARP List
Choose Local Device > Diagnostics > Info Center > ARP List.
Displays ARP information on the device, including dynamically learned and statically configured ARP mapping
entries.
To Next Page
Loading...
Need help?
General