Web-based Configuration Guide System Configuration
147
Caution
Resetting the device will clear current settings and reboot the device. If a useful configuration exists in the
current system, you can export the current configuration (see 10.4) before restoring the factory settings.
Exercise caution when performing this operation.
10.5.2 Resetting the Devices in the Network
Choose Network > System > Management > Reset.
Select All Devices and choose whether to Unbind Account, click Reset All Devices and all devices in the
current network will be restored to their factory settings.
Caution
Resetting the network will clear current settings of all devices in the network and reboot the devices. Exercise
caution when performing this operation.
10.6 Rebooting the Device
10.6.1 Rebooting the Device
Choose Self-Organizing Mode > Network > System > Management > Reset.
Choose Standalone Mode > System > Reboot.
Select Local and click All Devices. The device will restart. Do not refresh the page or close the browser during
the reboot. After the device is successfully rebooted and the Web service becomes available, the device
automatically jumps to the login page.
To Next Page
Loading...
Need help?
General