Web-based Configuration Guide Login
5
logged in device. If only one device is configured or global configuration does not need to be synchronized to
the device, you can disable the self-organizing network discovery function.
1.5 Switching the Management Mode
In standalone mode, you can configure and manage only the current logged in device without self-organizing
network function. As shown in
In self-organizing network mode, the Web page has the network mode and the local device mode. Click the
Currently in Network mode in the navigation bar and select the desired mode from the drop-down list box.
⚫ The network mode: Display the management information of all devices in the network and configure all
devices in the current network from the network-wide perspective. As shown in;
⚫ The local device mode: Only configure the device that you log in to. As shown in.
To Next Page
Loading...
Need help?
General