Ruijie Reyee Series

Cookbook Product Introduction
7
RG-RAP6262
LED Indicator
State
Meaning
Wi-Fi LED (Green)
Flashing
Data is transmitted by Wi-Fi.
Solid on
Wi-Fi is enabled and no data is transmitted.
Off
Wi-Fi is disabled.
System Status
LED (Blue)
Fast flashing
The access point is starting up.
Slow flashing (at 0.5 Hz)
The network is unreachable.
Flashing twice in
succession
Possible cases:
Restoring the access point to factory settings.
Upgrading the firmware.
Handling alarms automatically.
Note: Do not power off the access point in this case.
Solid on
The access point is functioning properly.
Off
The access point is not receiving power.
LAN Port Status
LED (Green)
Flashing
The port has made a successful link and is
sending/receiving traffic.
Solid on
The port has made a successful link and is not
sending/receiving traffic.
Off
No link is detected for the port.
SFP Port Status
LED (Green)
Flashing
The port has made a successful link and is
sending/receiving traffic.
Solid on
The port has made a successful link and is not
sending/receiving traffic.
Off
No link is detected for the port.
RG-RAP6260(H)
LED Indicator
State
Meaning
LED Indicator
Off
The access point is not receiving power.
Slow Blinking
The access point is operating normally but there is an
alarm generated.