Ruijie Reyee Series User Manual

Cookbook Configuration
54
4.3 Advanced Configuration
4.3.1 ARP List
Note
This function is not supported when the device works in AP mode.
ARP List displays the mapping relationship between IP addresses and MAC addresses.
The device learns the IP and MAC addresses of network devices connected to ports of the device and generates
ARP entries. You can bind ARP mappings to improve network security.
 In SON mode, select Local Device and choose Advanced > Local DNS.
 In standalone mode, choose Advanced > Local DNS.
In Local Device mode, choose Security > ARP List.
ARP mappings can be bound in two ways:
 Select a dynamic ARP entry in the ARP list and click Bind. You can select multiple entries to be bound at
one time and click Bind Selected to bind them. To remove the binding between a static IP address and a
MAC address, click Delete in the Action column.

Ruijie Reyee Series Specifications

General

Model	Reyee Series
Category	Wireless Access Point
Wireless Standards	IEEE 802.11a/b/g/n/ac/ax
Frequency Bands	2.4 GHz, 5 GHz
Antenna Type	Internal or External
Ports	1 x Gigabit Ethernet
Power Supply	PoE or DC power adapter
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Management	Web-based
Security	WPA2