Ruijie Reyee Series

Cookbook Configuration
53
Switch to the DHCP Clients tab page to check information about an online client. Click Convert to Static IP.
Then, the static IP address will be obtained each time the client connects to the network.
Binding Static IP Addresses
Note
This function is only available in router mode.
 In SON mode, select Local Device and choose Network > LAN > Static IP Addresses.
 In standalone mode, choose Network > LAN > Static IP Addresses.
Click Add. In the displayed dialog box of static IP address bindings, enter the MAC address and IP address of
the client to be bound, and click OK. After a static IP address is bound, the bound IP address will be obtained
each time the client connects to the network. You can click Edit to modify IP address and MAC address.