⑤
The APP prompts that the level calibration is successful, the front light becomes steady white,
and the rear light becomes steady blue; indicating that the calibration is complete.
When the calibration is completed,the gimbal will start to work after 20 seconds. "Fly" is
displayed in the app, and you can now prepare to take off.
④
F11GIM User Manual
Calibrate the gyroscope/level
Make sure that the Aircraft is placed on a level ground and there is enough space
under the camera.
Push the left and right joysticks to the "11 o'clock" and "1 o'clock" positions respectively.
①
②
③
The front white and back blue lights flash quickly, the camera rotates up and down again for
self-checking, and the App displays horizontal calibration.
When the Aircraft's flight state is tilted and unstable, please land the Aircraft on a level
ground for gyroscope/horizontal calibration.
When Aircraft resets the gyroscope/horizontal calibration, the camera will also swing up
and down again for self-checking to ensure that there is enough space at the bottom of
the camera.
Copyright ©2021 Ruko All Rights Reserved.
35
The aircraft is placed on the
horizontal ground, search GPS satellite
signal, search white blue light slow
flashing, signal search success, the
aircraft white blue light is always
bright, indicating star search success,
you can fly.
Level Calibration
1
To Next Page
Loading...
