U11PRO User Manual
Copyright ©2023 Ruko All Rights Reserved.
35
4.4 Paring the Transmitter
Before each aircraft flight, you need to link with the Transmitter.
After the linking is successful, you can control the flight of the
Aircraft. The steps for the pairing are as follows:
Turn on Aircraft
Turn on Transmitter
Once successfully paired, 4 indicator light flashing change to
indicator light is always on and dripping sounds
①
②
③
Connect your mobile phone to Aircraft's "RUKO-U11PRO-******",
tap the APP to enter the control interface; the mobile phone screen
displays information such as the Transmitter's battery signal and
camera screen.
④
Before each flight, check the power of the Transmitter. The rear
3 lights indicate power, only one indicator is on when the
battery is low.
Keep the battery at around 50-60% and recharge it every 1
month or So to keep the battery active.
To Next Page
Loading...
