MODEL 53515/53615/63515/63615/73515/73615
26
Function:
When valve is in service status, if water tank is short of water, pump
starts working, but if water tank has enough water, the switch of liquid
level controller is closed, so pump doesn’t work.
When valve in regeneration cycle, inlet always has water no matter
what is water condition in water tank. As Runxin valve, no water passes
outlet in regeneration cycle, it ensures no water fill into brine tank. A
liquid switch at the top opening well or in middle water tank in RO system
protects pump from working without water in case of out of raw water.
3).Liquid Level Switch in Water Tank Controls Inlet Pump (Three-phase,
Figure 3-6) (Set b-01)
To Next Page
Loading...
Need help?
General
