Ruris DAC 310 - Power Supply; Safety Manipulation Fuel

EN
11
6. Gasoline or poor quality oils can damage sealing rings, gasoline vacuum
hoses, piston, segments, cylinder or engine fuel tank.
Recommended mixing rate
Mixing rate
L gasoline 1 2 3 4 5
Ml oil for 2-stroke engines 25 50 75 100 125
▪ measure exactly the amount of gasoline and for oil we recommend that you
use a graduated syringe.
▪ homogenization is done by stirring the mixture in a fuel container without
impurities.
▪ put the gasoline in a clean fuel container.
▪ pour all the oil and mix well.
▪ put a clear label on the outside of the container to avoid confusion with other
containers.
6.2 POWER SUPPLY
Position the brushcutter on a work table, unscrew
the fuel tank cap and pour the fuel mixture.
Information on the volume of the fuel tank can be
found in the table in the chapter "TECHNICAL
DATA". Do not use fuel stored in the tank for more
than 7 days.
6.3 SAFETY MANIPULATION FUEL
This fuel is extremely flammable. Do not smoke or bring flame or spark
near the fuel.
1. Stop the engine before refueling.
2. Using an inappropriate oil can lead to spark plugging, clogging the drain, or gripping
the piston segments.