Made of steel, intended for the cutting of shrubs, shrubs,
thin stems and grubbing-up works.
9.3 WARNINGS
Power or grease is not done with the engine running.
The exploitation of the brushcutter in the field is done with 15-minute breaks, between
the fuel supplies. Continuous exploitation is prohibited!
Anything person which not know machine and not he used never, must to read the
manual of utiling before of a work with product.
Prepare yourself of thing with protective equipment. Before starting work, inspect the
ground, remove stones, wood, pieces of metal and any foreign bodies.
Before of a start engine , user must to se ensure that It has a radius of minimum 15m into the
the face of the brushcutter free.
Wipe any leak of fuel and oil .
Always fill tank with gasoline when engine It is stopped and in a space ventilated. Don't
smoke when do this operation.
Before of a begins the thing with brushcutter learn to stop engine into the conditions of safety
and to use machine correct.
Do not transport or clean the machine with engine running.
Not work into the slope bigger then 15 degrees.
To Next Page
Loading...
