EN
12
3. Stay away from the power point at least 3 meters before starting the engine.
4. Using inappropriate fuel will cause severe engine failure in a short time.
7. COMMISSIONING
Before putting the brushcutter into service you must ensure that the following conditions
are met :
• within a radius of 15 meters on either side of the brushcutter, there are no
persons or objects with which it could come into contact.
• the brushcutter is placed in a horizontal position on the ground.
• the cables are mounted correctly.
• the horns are correctly mounted and fixed.
• the reducer head has Vaseline graffitiated on the screw.
• Ruris 2tt Max oil mixture or API classification oil: TC or higher and fuel is
correctly proportioned 25 ml oil / 1 liter fuel (lead-free petrol).
• the mixture is made in a special and homogenized container, the mixture
cannot be used more than 7 days in optimal conditions.
• the engine has enough fuel to start.
• the throttle lever is fully and in the intermediate position for cold start and
locked.
• the on-off switch is positioned in position “I” (on)
• the cutting disk is mounted and fixed correctly, provided with the safety nut.
• the protection guard is mounted correctly.
• all the screws of the brushcutter are tightened firmly.
To Next Page
Loading...
