EN
13
Starting the engine
Primer the carburetor with gasoline by 3 successive presses of the gas pump
Position the shock flap in the closed position.
Turn on the accelerator lever to the maximum and lock it.
Release the throttle lever.
Secure the brushcutter with your left hand and pull the starter string with your right hand.
The pulling must be done in two stages. The first stage will be done by gently pulling the
starter until the string is prestressed. The second stage will be through constant shooting.
The shooting is performed until you hear the first starting symptom. After the first starting
symptom, stop pulling the starter string and switch the shock flap to the open position
To Next Page
Loading...
