EN
19
• The autocute can be used successfully in obstacle areas, for ventilation
trees, in border joint areas.
To handle the wire you will need to act on the self-catch by pressing it on the
ground or by lightly hitting it on the ground, according to Fig. 14
Fig. 14
This wire handling operation will be performed at maximum engine speed.
9.2 TYPES OF KNIVES AND THEIR USE
2-wire cutting head whose length is automatically adjusted
by self-retting using the knife on the device called the load
limiter. It is used especially for mowing and landscaping
works, in places with obstacles.
Made of steel, intended for mowing hard and dry grass, on
large areas.
Made of steel, intended for removing hard grass and
grasses, on large areas.
To Next Page
Loading...
