Russell Hobbs RHDW1

Failure Codes: C2 – C3 – C4 Models
E
RROR CODE
ERROR
DESCRIPTION
CONTROL
DISPLAY WASH RINSE DRY END START/PAUSE
F
5
Inadequate water
supply
• Make sure the water input
tap is totally open and that
there is no water cut.
• Close the water input tap,
separate the water input
hose from the tap and clean
the filter at the connection
end of the hose.
• .Water inlet valve filter can
be
• Water inlet valve can be out
of order
• There can be a problem with
the cable connection of water
inlet valve.
• Floater switch can be out of
order or have a problem with
the cable connection.
• Pressure switch of the heater
casing group can have a
mechanical or cable
connection problem.
• Circulation pump can be out
of order or have a problem
with the cable connection.
• Electronic card can be out of
order.
F
3
Error of continuous
water input
• Water inlet valve can be out
of order or can not be closed.
• Electronic card can be out of
order.
F2
The waste water in
the machine cannot
be discharged.
• Water outlet hose is clogged.
• Water discharge hose can be
out of order.
• There can be a problem with
cable connection of the drain
pump.
• Pressure switch of the heater
casing group can have a
mechanical or cable
connection problem.
• Electronic card can be out of
order.
12