Russell Hobbs RHDW1

ERROR CODE ERROR DESCRIPTION CONTROL
DISPLAY WASH RINSE DRY END START/PAUSE
F8
Heater Error: Inadequate
heat
• NTC can be out of order.
• Faulty NTC cable connection
can be faulty. NTCshort or
open circuit.
• Thermal protection can be out
of order.
• Heater can be out of order or
cable connection can be out
order.
Alarm is active against water
overflow
• Floater switch can be out of
order or have a problem with
the cable connection.
• Electronic card can be out of
order.
F1
Alarm is active against water
leakage
• There can be a water leakage
from the tub.
• Floater switch can be out of
order or have a problem with
the cable connection.
• Electronic card can be out of
order.
F7
Exceed heating problem
(water inside the machine is
too high)
• water inside the machine is
>77°C, NTC can be out of
order.
• Electronic card can be out of
order.
•
F9
Diverter position problem
• Diverter electric contacts can
have open circuit
• Cable connection of tghe
diverter can be faulty
• Electronic card can be out of
order.
13