From the component:
Probes of the tester should be applied on to the related connectors as shown on the
pictures
Drain Pump:
From the electronical card:
C
N2.2 – CN2.4 143 Ω ± % 7
Above sketch show the connectors of the drain pump on the electronical card.
Probes of the tester should be applied on to the related connectors.
Measurement of the primary
windings of the washing pump
ELECTRONİCAL CARD
CONNECTORS
BROWN
RED
CONNECTORS SHOULD BE MEASURED
Measurement of the secondary
windings of the washing pump
– blue cable)
55
To Next Page
Loading...
